Where can I find the list of projections and their arguments?
Changing Ellipsoid / Why can’t I convert from WGS84 to Google Earth / Virtual Globe Mercator?
How do I calculate distances/directions on the surface of the earth?
What options does PROJ allow for the shape of the Earth (geodesy)?
How do I change the radius of the Earth? How do I use PROJ for work on Mars?
Where can I find the list of projections and their arguments?¶
proj command itself can report the list of projections
-lp option, the list of ellipsoids with the
the list of units with the
-lu option, and the list of built-in datums with
How do I do datum shifts between NAD27 and NAD83?¶
cs2cs application. The following example demonstrates using the
default shift parameters for NAD27 to NAD83:
% cs2cs +proj=latlong +datum=NAD27 +to +proj=latlong +datum=NAD83 -117 30
117d0'2.901"W 30d0'0.407"N 0.000
In order for datum shifting to work properly the various grid shift files must be available. See below. More details are available in the section on resource files.
How do I build/configure PROJ to support datum shifting?¶
After downloading and unpacking the PROJ source, also download and unpack the set of datum shift files. See Download for instructions how to fetch and install these files
On Windows the extra nadshift target must be used. For instance
nmake /f makefile.vc nadshift in the
A default build and install on Unix will normally build knowledge of the
directory where the grid shift files are installed into the PROJ library
/usr/local/share/proj). On Windows the library is normally built
thinking that C:PROJNAD is the installed directory for the grid shift files.
If the built in concept of the PROJ data directory is incorrect, the
environment can be defined with the correct directory.
How do I debug problems with NAD27/NAD83 datum shifting?¶
Verify that you have the binary files (eg.
/usr/local/share/proj/conus) installed on your system. If not, see the previous question.
Try a datum shifting operation in relative isolation, such as with the cs2cs command listed above. Do you get reasonable results? If not it is likely the grid shift files aren’t being found. Perhaps you need to define
The cs2cs command and the underlying
pj_transform()API know how to do a grid shift as part of a more complex coordinate transformation; however, it is imperative that both the source and destination coordinate system be defined with appropriate datum information. That means that implicitly or explicitly there must be a
+nadgrids=clause or a
+towgs84=clause. For instance
cs2cs +proj=latlong +datum=NAD27 +to +proj=latlong +ellps=WGS84won’t work because defining the output coordinate system as using the ellipse WGS84 isn’t the same as defining it to use the datum WGS84 (use
+datum=WGS84). If either the input or output are not identified as having a datum, the datum shifting (and ellipsoid change) step is just quietly skipped!
PROJ_DEBUGenvironment can be defined (any value) to force extra output from the PROJ library to stderr (the text console normally) with information on what data files are being opened and in some cases why a transformation fails.
export PROJ_DEBUG=ON cs2cs ...
PROJ_DEBUGsupport is not yet very mature in the PROJ library.
-vflag to cs2cs can be useful in establishing more detail on what parameters being used internally for a coordinate system. This will include expanding the definition of
How do I use EPSG coordinate system codes with PROJ?¶
There is somewhat imperfect translation between 2D geographic and projected
coordinate system codes and PROJ descriptions of the coordinate system
available in the
epsg definition file that normally lives in the
directory. If installed (it is installed by default on Unix), it is possible
to use EPSG numbers like this:
% cs2cs -v +init=epsg:26711 # ---- From Coordinate System ---- #Universal Transverse Mercator (UTM) # Cyl, Sph # zone= south # +init=epsg:26711 +proj=utm +zone=11 +ellps=clrk66 +datum=NAD27 +units=m # +no_defs +nadgrids=conus,ntv1_can.dat #--- following specified but NOT used # +ellps=clrk66 # ---- To Coordinate System ---- #Lat/long (Geodetic) # # +proj=latlong +datum=NAD27 +ellps=clrk66 +nadgrids=conus,ntv1_can.dat
The proj/nad/epsg file can be browsed and searched in a text editor for coordinate systems. There are known to be problems with some coordinate systems, and any coordinate systems with odd axes, a non-greenwich prime meridian or other quirkiness are unlikely to work properly. Caveat Emptor!
How do I use 3 parameter and 7 parameter datum shifting¶
Datum shifts can be approximated with 3 and 7 parameter transformations. Their use with cs2cs is more fully described in the geodetic tranformation section.
More generically, the Helmert transform can be used with cct.
Does PROJ work in different international numeric locales?¶
No. PROJ makes extensive use of the
atof() C functions
internally to translate numeric values. If a locale is in effect that modifies
formatting of numbers, altering the role of commas and periods in numbers, then
PROJ will not work. This problem is common in some European locales.
On UNIX-like platforms, this problem can be avoided by forcing the use of the
default numeric locale by setting the
LC_NUMERIC environment variable to C.
$ export LC_NUMERIC=C $ proj ...
NOTE: Per ticket #49, in PROJ 4.7.0 and later pj_init() operates with locale overridden to “C” to avoid most locale specific processing for applications using the API. Command line tools may still have issues.
Changing Ellipsoid / Why can’t I convert from WGS84 to Google Earth / Virtual Globe Mercator?¶
The coordinate system definition for Google Earth, and Virtual Globe Mercator is as follows, which uses a sphere as the earth model for the Mercator projection.
+proj=merc +a=6378137 +b=6378137 +lat_ts=0.0 +lon_0=0.0 +x_0=0.0 +y_0=0 +k=1.0 +units=m +no_defs
But, if you do something like:
cs2cs +proj=latlong +datum=WGS84 +to +proj=merc +a=6378137 +b=6378137 +lat_ts=0.0 +lon_0=0.0 +x_0=0.0 +y_0=0 +k=1.0 +units=m +no_defs
to convert between WGS84 and mercator on the sphere there will be substantial shifts in the Y mercator coordinates. This is because internally cs2cs is having to adjust the lat/long coordinates from being on the sphere to being on the WGS84 datum which has a quite differently shaped ellipsoid.
In this case, and many other cases using spherical projections, the desired approach is to actually treat the lat/long locations on the sphere as if they were on WGS84 without any adjustments when using them for converting to other coordinate systems. The solution is to “trick” PROJ into applying no change to the lat/long values when going to (and through) WGS84. This can be accomplished by asking PROJ to use a null grid shift file for switching from your spherical lat/long coordinates to WGS84.
cs2cs +proj=latlong +datum=WGS84 \ +to +proj=merc +a=6378137 +b=6378137 +lat_ts=0.0 +lon_0=0.0 \ +x_0=0.0 +y_0=0 +k=1.0 +units=m +nadgrids=@null +no_defs
Note the strategic addition of
+nadgrids=@null to the spherical projection
Similar issues apply with many other datasets distributed with projections
based on a spherical earth model - such as many NASA datasets. This coordinate
system is now known by the EPSG code 3857 and has in the past been known as
EPSG:3785 and EPSG:900913. When using this coordinate system with GDAL/OGR it
is helpful to include the +wktext so the exact PROJ string will be preserved
in the WKT representation (otherwise key parameters like
+proj=merc +a=6378137 +b=6378137 +lat_ts=0.0 +lon_0=0.0 +x_0=0.0 +y_0=0 +k=1.0 +units=m +nadgrids=@null +wktext +no_defs
How do I calculate distances/directions on the surface of the earth?¶
These are called geodesic calculations. There is a page about it here: Geodesic calculations.
What options does PROJ allow for the shape of the Earth (geodesy)?¶
for possible ellipse options. For example, putting
WGS84 Earth shape.
What if I want a spherical Earth?¶
+ellps=sphere. See https://github.com/OSGeo/proj.4/blob/5.2/src/pj_ellps.c
for the radius used in this case.
How do I change the radius of the Earth? How do I use PROJ for work on Mars?¶
You can supply explicit values for the semi minor and semi major axes instead of using the symbolic “sphere” value. Eg, if the radius were 2000000m:
+proj=laea +lon_0=-40.000000 +lat_0=74.000000 +x_0=1000000 +y_0=1700000 +a=2000000 +b=2000000"
How do I do False Eastings and False Northings?¶
+y_0 in the projection string.